Galvanized Wire For Automotive Exhaust Muffler

Description

Production process: It is made of high-quality low-carbon steel wire rod. It is made of high-quality low-carbon steel and processed by drawing, pickling and rust removal, high temperature annealing, hot-dip galvanizing and cooling.

Characteristics: galvanized iron wire has good toughness and elasticity, and the maximum amount of zinc can reach 300 g/m2. It has the characteristics of thick galvanized layer and strong corrosion resistance.

Galvanized wire application: The products are widely used in construction, handicrafts, wire mesh, highway fences, product packaging and daily civil use.

Parameter

Bright Annealed Wire For Airbag

Size：0.2-0.9mm

Packing： Coil， Spool

Tensile strength, intensity distribution RANGE

Specifications (mm) the intensity of the size range (mpa), tensile strength

0.24 — 5.00:290-550

2.00 — 5.00:400-550

Appearance requirements

A. The surface of the coating is continuous and practical and smooth.

B. The installation and combination of the plated parts are not allowed to sag, drip or slag.

C. The surface of the plated parts shall be free of defects such as leakage plating and exposed iron, but the defects are allowed in the following cases.

a. The plating area is a spot having a diameter of 0.5 mm or less.

b. Regardless of the size of the plated part, the spot area of the plating plate is 0.5-1 mm in diameter, not more than 3 points per square centimeter, and the total number of spots in the plated part does not exceed 10 points.

c. Sag or slag that does not exceed 1.5 mm in height at non-joined or non-joined corners.

d. Contact damage between the plated parts and the hanger and the operating tool, but no iron.